Safeguard Employees from Accidents and Unwanted Mishaps by Using Quality Protection Systems

 

The safety of a worker is of utmost importance, and all precautions and management should be taken care of by the employer. Employee protection and welfare are vital, and executing a fall protection procedure prevents any unwanted accidents and saves lives. Regulatory authorities in several countries have taken the management seriously owing to the increase in the fall injuries, and raised the fines for failure to abide by the standards.

OSHA standards put forward specific rules that you need to follow without fail. Every construction does not get a nod from the authorities if it does not support the regulations set by the OSHA standards. Several service providers like www.edgefallprotection.com, offer high-quality rails and guard systems to its clients with top quality customer surveillance. 

You can protect the accidents with the aid of various systems, which are explained below: 

The Guardrail System

 

The guardrail system comprises a top rail located approximately forty-two inches above the floor. In addition to that, you have to install a mid-rail in between the floor and the top rail. In the absence of a mid-rail, you can utilize mesh or screens that extend from the floor to the topmost rail. Also, an essential thing to memorize is that the toe board should be placed three and a half inches high. The placement of a toe board is an integral part of the system. 

The Personal Fall Arrest System

A personal fall arrest system comes in a variety of options, and it constitutes different components that can be useful to prevent any mishaps. You can wear these items. Some of the prime examples of personal fall arrest protection equipment are body harnesses, lifelines, lanyards, connectors, deceleration devices, and many others. All such components have to be attached to an anchorage point that is competent enough to back at least five thousand pounds. Moreover, this arrest system has to be inspected by experts in the field before each use. 

You can also use a positioning device system that acts as a body harness, enabling the worker to perform any work on a vertical surface, with both hands-frees. A cutting-edge safety monitoring system includes having trained personnel monitoring the workers on the elevated surface, along with the timely warning of any fall hazards.

The Warning Line System

A warning line system comprises ropes or lines installed in your work site. These ropes act as a barrier and aid workers when they are approaching the edges. You can install such warning line systems on only low-pitched roofs. This type of system should be used with a personal arrest system for the best results.

Every construction or real estate company should analyze the need for fall protection systems. You can develop a site-specific program that highlights a detailed procedure for the protection process. It should also constitute the use of measures and equipment and all the rescue plans in detail. Moreover, conduct training sessions for your employees to understand the use of some machinery and what they should be doing in times of panic.

 

Leave a Reply

Your email address will not be published. Required fields are marked *