Choosing The Best Iron Filter For Well Water – Buyer’s Guide

5/5 - (1 vote)

While water is a free resource, we shouldn’t take it for granted. In some regions, you might note funny tastes and odors from tap water. Such water is unpalatable and might pose serious health hazards to your family. But the good news is that water treatment solutions abound in the market. However, most homeowners find it overwhelming to find the best iron filter for well water.

We don’t want you to probe the information on your own because we have already researched it for you. Knowledge is power, but a single mistake you can cost you now and in the future. Are you aware of the parameters you should look for in the well filtration system for iron? There are mistakes you should avoid at all costs.

• Assuming that Well Pumps are the Same

Well water pumps differ in size and the rates at which they pump water. Inside the well, there is a submersible pump. There can also be another pump on the ground level to pull water from the water table. This is the jet pump that builds up pressure within the house. Some well systems feature a big tank for water storage before it is pumped into the building. Other types of pumps are gravity-fed, so they leverage gravitational force to supply water to the required sites.

 

Knowing the principles of well water pumps is critical in determining your house’s best well water filtration system. The ultimate solution will affect the flow rate and water pressure in your property. For instance, if there’s a pressure tank in the well, the filter should be installed right after the pressure tank but not before. This will prevent possible damage to the pump.

Always test your pump to calculate the flow rate. This is what will guide you in choosing the size of a filtration system. Almost all well water filters are self-cleaning and have a specific minimum flow rate. You cannot install a filter that needs 10 gallons per minute with a pump that produces 7 gallons per minute. The system will fail to backwash after a few weeks and will already be contaminated. The filtering medium eventually seizes to function and hardens, making the entire water system ineffective.

The size of the water systems should be in a way that the flow rates are in accord. The force should be sufficient to move water from the well through the filter’s media and lift it to allow full cleaning. An oversized filter causes loss of pressure, whereas an undersized medium can easily be pushed downstream into the plumbing.

• Ignoring the Water Chemistry

Every water treatment system has a specific range and conditions under which they work. For instance, naturally acidic wells have a lot of iron in them. Most iron filters cannot remove iron in acidic conditions. This means the water must first be treated to curb the acidity.

Some wells are situated close to industrial sites, gasoline stations, or chemical plants. These wells must be examined every year to check the chemical composition in the water. Bacteria tests are a must in the case of livestock and septic tanks in the region. Most aesthetic issues in water quality include odors, bad taste, and staining.

Such problems can be addressed by mineral testing. It is recommended to check the PH, turbidity, alkalinity, calcium hardness, and total dissolved solids. An additional investigation should be carried out to check for manganese, chloride, lead, sulfate, arsenic, sodium, and nitrate. Without knowing what elements are in the well water, choosing the best whole house water filtration for wells can be daunting.

Choosing a Substandard Filtration System

Never compromise the safety and health of your family to save some money. Be sure to choose high-quality filters. There are numerous cheap models, but they don’t work well in the long run. To decide on the best systems for your whole house, visit the nearest well water company. It is especially critical if you suspect severe contaminants like radon and hydrogen sulfide. Water wells are not created the same. Hence they need different filtration mediums. Opt for filtration mechanisms with NSF-certified components.

These have been optimized for efficiency, reliability, and durability. Also, check if the manufacture gives a lifetime warranty on the product. You might also want a well water filter with a money-back guarantee just in case it doesn’t fulfill the intended purpose.

• Handling Water Treatment By Yourself

This can lead to a whole lot of mistakes and probably costly repairs shortly after. Take away the guesswork by working with competent companies specializing in water testing, well inspection, water purification, and disinfection. Experts will always give you the best recommendations for water filtration methods tailored to your specific needs. The upfront cost may seem like a great deal, but a professional will save you lots of regrets down the line.

In Summary

Do you have a problem with your well water and unsure of what solution is suitable for your household? You need experienced professionals to guide you on selecting the best whole house filtration equipment. An expert in water filtration will direct you on how to assess water chemistry in the well. They will also help you understand better water pressure and the pumping rate in your home. Keep in mind that there is no one-size-fits-all for every water contaminant or application.

Know the potential of each filtration method and precisely what they remove. In particular, beware of the flow rate your chosen filter can process. Then figure out under what pressure they can comfortably work. Solid know-how of well water systems’ operations allows you to make concrete decisions on the best well water filtration system.