Have you ever wondered how clean your carpet truly is? While it may look perfectly fine on the surface, there may be tons of impurities—dust, dirt, and other debris—that could be buried in between the fibers without you even noticing. This isn’t as harmless as it may sound, especially since these particles can negatively affect the quality, comfort, and appearance of your carpet over time, so here are a few tips that can help you keep your carpet clean and tidy!

Vacuum Your Carpet Regularly

Most people don’t clean their carpets as often as they should because they believe it to be difficult and complicated, but it really isn’t. Incorporating your carpet into your regular household cleaning routine can be as easy as simply running your vacuum cleaner over it. Here are a few tips to keep in mind when doing this:

• Use either a soft brush or upholstery attachment with your vacuum cleaner to clean your carpet much more gently
• Always use several strokes for each area to ensure that all the dirt is lifted off
• Don’t forget the outer corners and edges of your carpet, which are often overlooked

Address Stains Immediately

The moment something spills on your carpet, make sure that you take immediate action. Not only will this stop the stain from absorbing deeper into your carpet, but it’ll also make the spill much easier to clean off. You’ll also be able to reduce the chances of any stains lingering afterward.

To do this, get a clean and dry cloth and use it to blot up the affected area, making sure to avoid any harsh rubbing and scrubbing motions, which will only push it further into your carpet.

Even with prompt cleaning, accidents or wear over time can lead to fraying, tears, or pulled fibers. Professional rug repair services can restore your carpet’s integrity by reweaving damaged areas, securing loose edges, or patching holes.

Use the Right Commercial Cleaner

There are definitely many commercial cleaners out there that can help you tackle any stains and spills on your carpet, but make sure that you keep the following tips in mind:

• Choose a commercial cleaner that’s specifically formulated for carpet cleaning to prevent any inadvertent damage or discoloration
• Read the instructions printed on the back carefully before proceeding. This label contains valuable information that’ll help you use the product correctly and safely.
• Always spot test commercial cleaners on an inconspicuous area of your carpet to see whether or not it’s truly safe to use

Create a Homemade Cleaner

While commercial cleaners are definitely effective at doing their job, some people may be a bit wary of exposing their carpets and homes to the harsh chemicals that these products contain. Fortunately, you can always opt to create an easy homemade carpet cleaner by combining a cup of distilled white vinegar, a cup of water, and a tablespoon of dish soap in a spray bottle before shaking everything together. Here’s how you can clean your carpet with this solution:

• After blotting at the stain and creating your solution, lightly mist the affected area with your DIY solution until it’s damp, making sure to avoid oversaturating the stain.
• Leave the solution to sit for a few minutes before using a microfiber cloth to blot the stained area. Repeat this step as many times as needed until the stain is gone.
• Get another cloth and dampen it with water before using it to blot the cleaned area. This will help remove any residue that the cleaner may have left behind.
• Finally, use another dry cloth to dab away any excess moisture before leaving the spot to dry completely.

Don’t Underestimate Baking Soda

That box of baking soda hiding away inside your cupboards may be more useful than you thought. There are many different ways that you can use baking soda to keep your carpet clean and fresh. Here are some ways that you can try:

• General Cleaning: After vacuuming your carpet, cover it with a layer of baking soda before leaving it for a few minutes. Then, use a cleaning brush to work the baking soda into the carpet fibers. You may notice some dirt and debris starting to come off your carpet. Once you’re done, vacuum up the carpet once again to remove the white powder.
• Moisture Absorption: If your carpet has suffered a recent spill or is simply moist to the touch, just cover the area with a thick layer of baking soda, making sure that the entire spot is covered. Leave this for anywhere between 15 minutes to an hour, depending on the severity of the situation. The baking soda may start to transform into a paste, but that’s how you know it’s working. Finally, use either a damp cloth or a vacuum cleaner to remove the residue.
• Odor Removal: For any stubborn smells or odors, simply locate the source before covering it with baking soda. Baking soda will absorb and neutralize the stench rather than simply covering it up with a perfume. Leave this for 30 minutes to an hour before removing the baking soda with a vacuum cleaner.

These are some cleaning tips that’ll help you keep your carpets looking and feeling their best, but they need to be done consistently in order to see results.

For many homeowners in Singapore, this may not be possible, especially with all the curveballs that life may throw at you and your schedule. Fortunately, many companies offer different carpet cleaning Singapore services to help you keep your carpets consistently spotless and clean.