Chinese manufacturer Anet developed the Anet A8 3D printer kit. FDM technology is used for printing. This printer comes in a DIY kit which is easy to assemble before use. This Anet A8 is compatible with a wide variety of filaments having a build volume of 220 X 220 X 240 mm. It has a heated print bed which can reach the temperature of 100 degrees Celsius. It is the best player in the market of 3D printing. 

 There are many Anet A8 upgrades available which can transform your budget 3D printer into an impressive machine. For experiencing 3D printing aspects there many upgrades available of Anet A8 which can be 3D printed directly on the spot or can be purchased and mounted on the 3D printer for improving the 3D printing experience. 

In this article, we are providing a list of some of the best Anet A8 upgrades. 

1.  e3D V6 Anet A8 HotEnd

There are many things you need to understand first then you can upgrade to e3D V6 HotEnd after you master all the things. This takes time but if you want to improve your print quality then replace the existing A8 hotend with a high-quality e3D V6, which can create a huge difference in print speed and print quality. You can also use varieties of materials. This is a little bit costly upgrade but can give the best result. 

2. MOSFET

The speciality of the MOSFET is that it can prevent the motherboard from overheating which is why MOSFET is considered the essential upgrade for the DIY 3D printer. This Anet A8 upgrade will reduce the fire risks and can provide better voltage to the motors. 

MOSFET can regulate the high workload which is created by the heated bed on the mainboard. It has a high current which can stress the mainboard connectors and can increase the possibility of a fire hazard or hardware malfunction but MOSFET is the saviour. 

If you are 3D printing with ABS, then MOSFET is really helpful. This is also a wise decision to use the MOSFET for the low-temperature 3D printing material. It has the facility to apply the second power supply unit which reduces the time taken for the heated bed to reach the required temperature. MOSFET will help you 3D print a holder which enables you safely mount it on a 3D printer. 

3.  Fibre – Glass reinforced belts

Fibreglass reinforced belt is another important Anet A8 upgrade. Anet A8 users think that the stock belts are cheap and easily stretchable which directly impacts your 3D print quality. There are some reasons which prove the Fibreglass reinforced belt best alternative. These belts are easy to use and quieter on your 3D print motors. Smoothness and accuracy can be increased with this Anet A8 upgrade. 

If you cut down the stock belts for installing them on the X-axis and Y-axis, they are too short to use with the tensioner, for this reason, this fibre-glass reinforced belt is the must-have upgrade for the Anet A8. 

4.  Igus DryLin bearings

If you are tired of noisy stock DIY kits and you want to reduce the sound then you can consider the option of Igus DryLin bearings. After replacing the stock metal linear bearing with the DryLin alternative you can upgrade your Anet A8 to silent and smooth. These upgraded bearings are self-lubricating and they don’t even rust, which makes them smoother over time. 

5.  Glass Bed

3D printer Glass bed helps you to print the flawless print bottom. Also, this helps you to remove the print easily from the glass bed and provides a clean glass bed before new printing. Glass is a reliably fast, dense, cheap, and stiff material. All this makes the glass a good option as a print bed. Using the glass bed as a print bed offers many advantages and characteristics.

The most strongest and durable option is Borosilicate glass. This Borosilicate glass has superior shock resistance and lowers thermal expansion, as it is created by adding some chemicals in regular glass with the boric oxide. For 3D printing applications, this has fantastic qualities as in 3D printing glass is subjected to various temperature changes. This will be considered the best Anet A8 upgrade.

6. Power Supply Upgrade

The power supply unit which comes with the original Anet A8 is both undersized and underpowered. But there is a facility to upgrade this crucial component. Higher quality power supply units offered more safety and less chance of breaking down. However, some users feel that there is no requirement for the upgradation of the power supply unit. The PSU which comes with the original Anet A8 is good enough for simple 3D printing. 

There are very few options for a better PSU for the 3D printer. One of the best choices is the eTopxizu 30amp power supply. 

7.  E3D Titan 

If you want to invest some money into your existing Anet A8 3D printer, then you have to consider the E3D titan extruder as an important upgrade. 

E3D Titan extruder is a geared extruder having a gear ratio of 3:1. This geared extruder uses the transmission ratio which helps in reducing the rotational speed of the gears that feed the filaments. This not only allows the powerful flow of the print material but also steady flow as opposed to direct drive extruders like Micro Swiss which allows for faster material flow but is unable to handle the consistency of the flow. This Anet A8 upgrade will be the best choice for users. E3D titan can be used with diameter filaments of 1.75mm or 2.85mm. Titan costs $35 – 54, which makes it one of the cheapest and most effective extruders on the market today.

8. AM8 metal frame

By upgrading this frame you can replace the fragile acrylic frame with a sturdy aluminium frame. This particular frame uses the Misumi 2040 aluminium extrusions and aluminium corner brackets for frame connections. This will make the frame sturdy and improve the 3D printer’s performance.  

In addition to the added rigidity, these frames add covers that can run your wires through the extrusion. 

9. Filament guide

This is the simple and quick-to-print Anet A8 upgrade which is a filament guide. Stock Anet A8 lacks the designated route or guidance system for your filament. If you print this filament, you can mount it on the 3D printer frame. This will flow and extrude without encountering any issues. 

10.  Anet A8 centred Fan Duct

In the stock, the Anet A8 fan is not included, but it can be 3D printed. This nozzle fan helps to cool down the freshly extruded plastic so that it can maintain the 3D print quality. 

One of the most important is the cantered fan duct created by the Arjjk. It has a unique design which can form the unique design around the nozzle. It has holes around the nozzles, this nozzle receives air from all sides. This will improve the overall quality of your 3D print. 

Best 3D Printing Software – “SelfCAD”

SelfCAD is a strong and simple-to-use 3D modeling software that is utilised by both experts and beginners. It includes an in-built online slicer for preparing designs for 3D printing without the need to switch to another piece of software. SelfCAD’s slicer supports the majority of popular FDM 3D printers.

SelfCAD is the first 3D modeling software that combines technical, creative, and 3D printing tools into a single easy-to-use product. It’s easy to use and provides a variety of strong tools for rendering, freehand drawing, and sketching. SelfCAD is a wonderful alternative if you’re seeking an easy-to-use 3D printer in 2022. You can see how long it will take to print your product and the size of the material required.

This slicer is available for download or uses online. It may be used to prepare both simple and complex objects for 3D printing, and it ensures the quality of the 3D printed designs.

SelfCAD is perfect for beginners to 3D design due to its user-friendly interface. Professionals can also use it to create complicated designs by utilising the program’s advanced features.

Conclusion: 

When you already have your 3D printer then you can print parts with your Anet A8. In this article, we already discussed all the printable parts and upgrade for Anet A8. You can use this information to upgrade the printer and makes the best use of it.